Tips & Tricks

cabbagehead · 01-28-2006, 10:33 PM

Hello Rob,
I don't know if you have set up an area for this yet but I thought I would post this here. It is not anything complicated but is a simple solution to a annoying problem.

Problem: Pumps that rest on the bottom of the sump usually put out a bunch of noise due to vibration

Solution: I used extra flex tubing from the plumbing of my tank and cut two pieces the same length as my pumps. I then took two tie straps and secured them to the pumps using the holes provided on the pumps. The result was a least 50% less noise from vibration. This can be done outside the sump as well. I know this is simple but it might be helpful for a newbie like me.

gwen_o_lyn · 01-29-2006, 05:35 PM

Very neat trick! I've heard of people putting mousepads under their pump too.

**JustDavidP** · 01-30-2006, 02:41 PM

Very good Cabbagehead... My Company, BBN Technologies, uses similar 'fixes' for noise issues with pumps and motors on various navy vessels. Maybe you have a career path with us

Dave

Reefbaby · 02-02-2006, 09:28 AM

Cabbagehead...I like that idea! Do you actually have a photo of what you've done?

Kevin McG · 02-02-2006, 09:52 AM

Great idea cabbagehead! and it just so happens that I am installing a new return pump Sat morning(mag 24).

I will give this a try and post my results with pictures

***Rob*** · 02-02-2006, 10:51 AM

great idea.
we would love to see the photos.

i think this made it to the first tips and tricks segment show last week.

i will also get some pics of mine posted for ya all to see

filatelico · 02-02-2006, 11:23 AM

That’s a good idea, I actually did one yesterday for my skimmer pump, and it actually reduced the noise considerably.

Thanks
Simon

cabbagehead · 02-02-2006, 11:39 PM

Thanks everyone! Well I just got home from a long day at work and have to go back in six hours so I will try to get some pictures up tommorow.

Thanks
Jack

pham411 · 02-03-2006, 10:10 PM

good idear..

cabbagehead · 02-03-2006, 11:00 PM

Here is the picture that I promised. Forgive me for it is not the best angle but you can get the general idea.
100_0067.jpg

Kevin McG · 02-08-2006, 11:09 AM

Here's mine

They are attached to a Mag-Drive 24 but I chose Super glue instead of wire ties. Thanks for the great idea!

***Rob*** · 02-08-2006, 02:20 PM

great, thansk for sharing the image..

i will surely be using this tip on a show

Kevin McG · 02-09-2006, 09:50 AM

Quote:

Originally Posted by Rob

great, thansk for sharing the image..

i will surely be using this tip on a show

Sounds Cool

mysterybox · 01-01-2008, 08:14 PM

great idea!

anything on or in a mouse pad that could cause harm?

**Phurst** · 01-01-2008, 08:36 PM

I used a mousepad for a while, and it seemed to be plain old neoprene, but I eventually swapped it out for some tubing just to be safe.

xtmreef · 01-18-2008, 03:18 AM

I use Enkemat under my Eheim 1260 return

**JustDavidP** · 01-18-2008, 09:06 AM

xtmreef...

Nice idea. However, do you find that you need to clean the Enkemat from time to time? I found that it gets grungy fast and can become a breeding ground for Aerobic bacterium. This, in turn, made my nitrates sky-rocket.

Dave