Jasonanatal's JBJ 28 gallon Nano Cube HQI Nano Reef Aquarium. - Page 3

Jasonanatal · 12-07-2007, 09:08 AM

Santa Made An Early Delivery featuring My New Tunze Nano DOC 9002 Protein Skimmer.

Well everyone knows that it's not fair to everyone else within your family to purchase anything right before Christmas but I was really never one to concern myself with something like that especially when it comes to my 28 gallon Nano Cube HQI SPS Reef Aquarium. With help of my credit card, Marine Depot and FedEx my new Tunze Nano DOC 9002 Protein Skimmer was delivered early by Santa.

No everyone knows that with a limited water volume as in the case of my Nano Reef Aquarium it very difficult to maintain prestine water quality without the use of some fancy gadgetry... that is the case unless your a fan of daily to bi-daily water changes which I'm not! So I searched the Internet and Polled the Forums in search of a great Protein Skimmer for my setup. Now me selection was extremely limited since I had factors effecting what I could and could not purchase. These factors included:

Size of the Protein Skimmer, which affected where I could place the Protein Skimmer on the rear of my Nano Reef Aquarium.
Performance/Efficiency of the Protein Skimmer, which affected what type of bioload my Nano Reef Aquarium could sustain and what type of Corals and Livestock I could house.
Price of the Protein Skimmer, well lets face it I don't want to be left withouth any Christmas shopping money. My wife would murder me!

Finally the decision was made to place an order with Marine Depot for the Tunze Nano DOC Protein Skimmer. Now many people that I questioned did not have any personal experience with this Protein Skimmer and where relying on the reputation of Tunze as the basis of their recommendation. Well I went along and said hell their Tunze if their bigger equipment works wonders then what do I have to loose, other then $12.00 in return shipping should it not work out they way I hoped. The equipment arrived a short time after and it was amazing to see the construction of this equipment. It was so simple that I started to question whether I would get the results that I wanted. After placing the base into the Rear Center Chamber of my 28 gallon Nano Cube HQI SPS Reef Aquarium, which just fit with a little elbow grease and firm love.

Well after a few days of monitoring and documentation I can say hands down this is the most efficient and absolutely silent running Protein Skimmer I have ever used. Their are no micro-bubbles produced as a byproduct of the Foam Fractionization process and the sludge that this thing pulls out is comparitive to mud. Also the collection cup requires no twisting or unlatching to remove it. Simply grab and lift and it slides out with no problem. Best of all you don't have to turn off the Tunze Nano DOC Protein Skimmer 9002 when emptying and cleaning the collection cup. The Tunze Nano DOC 9002 Protein Skimmer received the seal of approval from me hands down!

Personal Observation: Unfortunately the Tunze Nano DOC 9002 Protein Skimmer fits very snuggly within the Rear Center Chamber of my JBJ 28 gallon Nano Cube HQI Reef Aquarium. However, the collection cup cannot be mounted properly withithout removing the Integrated Hood of the Nano Reef Aquarium entirely, unlatching the Integrated Hood and resting it in a position where it crosses the top edge of the top of the Nano Reef Aquarium Glass or Using a Dremil tool to modify the Read of the Integrated Hood to allow for the collection cup to sit properly on the Tunze Nano DOC 9002 Protein Skimmer body. Also note that the skimmer requires that the collection cup sit properly on the body without any break in the seal or the Protein Skimmer will not function as all!

Video - This video was shot just a couple of hours after the installation of the Tunze Nano DOC 9002 Protein Skimmer. Please excuse the fact that the video is sideways.

Photograph - Tunze Nano DOC 9002 Protein Skimmer. A small package with big results.

Photograph - Tunze Nano DOC 9002 Protein Skimmer in operation Day #2.

Photograph - Tunze Nano DOC 9002 Protein Skimmer in operation Day #3.

Jasonanatal · 12-07-2007, 09:10 AM

Santa Made An Early Delivery featuring My New Tunze Nano DOC 9002 Protein Skimmer Continued.....

Photograph - Tunze Nano DOC 9002 Protein Skimmer in operation Day #4.

Jasonanatal · 12-07-2007, 09:28 AM

My Most Prized and Only Derasa Clam.

Here is my 6 month old Derasa Clam. It has grown substatially while in my posession and has relocated 3 times in the 6 month period. It's first home was a 90 gallon SPS Reef Aquarium that was tore down do to associated maintenance expenses being too high. The second home was a 10 gallon Aqurium with 300 watt of Metal Halide lighting which was a halfway home for my most recent setup and it's final destination. During the time in its second home a 1 inch Bleech spot formed on the Mantel which is most likely due to too much light and a very immature Aquarium setup. It's new home and final destination... at least for the time being is my JBJ 28 gallon Nano Cube HQI SPS Reef Aquarium which has been up and running for 7 weeks now. It is very happy and since being housed in its new home has recovered from it's Bleeched Spot. The Derasa clam is roughly 3 inches in Width, has an amazing Mantel extension and has some significant weight when out of water I'm estimating 6 lbs to 7 lbs roughly. It is fed Marine Snow once a week on Mondays and a mixture of Cyclopeeze and Mysis Shrimp once a week Wednesdays as well. Funny thing is my Gold Stripped Maroon Clownfish has decided to host within it and honestly it doesn't seem to mind. Go figure!

Photograph - My 6 month old Derasa Clam. My most beautiful Clam specimen.

**CarmieJo** · 12-08-2007, 01:25 PM

Nice! It looks like the skimmer is working well for you.

Jasonanatal · 12-19-2007, 04:23 AM

Time for a Little Do-It-Yourself Modifications: Making Some Space

Due to my recent addition of the Tunze Nano DOC 9002 Protein Skimmer which has been one of the most beneficial upgrades to my JBJ 28 gallon Nano Cube HQI SPS Reef Aquarium. However, in the process of solving one problem another problem managed to show itself. How about that for Murphy's Law? Even though the Tunze Nano DOC 9002 Protein Skimmer main body was able to just barely squeeze into the Center Baffle of the Rear Chamber of the JBJ 28 gallon Nano Cube HQI SPS Reef Aquarium the collection cup was too large and occupied a substantial amount of real estate that caused me to have to disconnect the stock Integrated Hood to accomodate for the Collections Cup's space requirements.

Photograph - The Tunze Nano DOC 9002 Protein Skimmer Collection Cup occupying just a little more space then I had hoped for.

Photograph - The stock Integrated Hood of the JBJ 28 gallon Nano Cube HQI SPS Reef Aquarium disconnected from the latches and hanging about 0.5 inch over the front of the Aquarium edge allowing light to spill out. Not the prettiest site especially with someone who has Obsessive Compulsive Disorder such as myself.

Now a couple of choices were available as possible resolutions for this issue. First solution would be to remove the stock Integrated Hood and purchase a pendant, hanging or bracket mounted Metal Halide Lighting System to replace the Integrated Hood. This option was indeed to most expensive and would wast a perfectly functioning Reflector, Electronic Ballast, and Moonlights. So I opted out of choosing this option. Second solution would be to get alittle creative and break out some tools without loosing an eye or finger in the process and reminding my wife that she cannot drive without a license and that the hospital is just a cab ride away! Plus this would save me money so that I could spend it on another form of equipment for my hobby. So I choose option two.

Here was the gameplan, I was going to use my Cordless Titanium Dremel tool in order to accurrately create an opening in the rear of the Integrated Hood so that it can be connected back to the latches while allowing suffiicient space for the Tunze Nano DOC 9002 Protein Skimmer Collection Cup to sit properly. I measure approximately 4 inches in Width x 0.75 inch in Depth in order to accomplish the end product. I made sure our son was out of the room and yes I wore safety goggles even though I didn't photograph them and went to work.

Photograph - The Cordless Titanium Dremel tool that will help me save some money and maybe lose a finger.

Photograph - The Integrated Hood disconnected entirely from the JBJ 28 gallon Nano Cube HQI Reef Aquarium.

Photograph - My work in progress no I just have to smooth the edges and clean up the mess before my wife yells at me that were having company over.

Jasonanatal · 12-19-2007, 04:24 AM

Time for a Little Do-It-Yourself Modifications: Making Some Space Continued.....

Photograph - The surgery is complete and it doesn't look half as bad as I thought and here the kicker I still have all 9 I mean 10 fingers.

Photograph - Now that looks just right! My Integrated Hood back on the JBJ 28 gallon Nano Cube HQI SPS Reef Aquarium with smooth edges. Now what can I buy with $250.00?

Jasonanatal · 12-19-2007, 04:42 AM

Electricity, Saltwater & Living Creatures Not a Good Combination.

My wife is such a wonderful woman who wants to make our very first Christmas together as special as it can be so she decided to give me a stocking stuffer from Santa Clause a bit early. I'm glad she pays attention when I bore her to death about the Marine Aquarium Hobby. It shows how much she loves me! Okay back on track, she remember that I had mentioned something about a Titanium Grounding Probe and decided to pick one up for me.

Photograph - My stocking stuffer, the Rid Volt Titanium Grounding Probe.

This is definitely an area that I can see makes enough of a point through common sense. Unfortunately I don't own any devices that can measure the electricl current in water if any at all before I setup the probe in comparison to after using the probe. In theory it makes perfect sense and what does it cost me? Not a penny so I just connected it to a grounded outlet as instructed and submersed the probe into the Aquarium Saltwater within the Far Left Baffle of the Rear Chamber on my JBJ 28 gallon Nano Cube HQI SPS Reef Aquarium.