Thanks, Poppin_Fresh for responding. The head will be approximately 3 to 4 feet because the display tank will be situated in front of the
sump and
fuges which will be arranged in a U-shaped affair. Room is a half octagon alcove in the lower level ( finished basement) 10' wide opening by 9' deep. Return pump will be below
DT.
Fuges will be stepped down to drain naturally into adjoining tank.
QT will also be in that same 'work' area. With the
DT centered in the opening, one side will be closed off,
DT framed to give it an in-the-wall look, opposite side of tank open for access to tanks, etc. I hope I explained to your satisfaction what I have planned. In the future once I get my 'feet wet' and have progressed from a hobbiest to an aquarist I will be installing a tank on the main level of our house.
Bill the OlGeezer
