hey i decided to add a
sump to my 5.5g reef
the
sump will contain
-CSS 65
skimmer
-600
GPH overflow box
-200
GPH return
-small
fuge
the
sump is going to sit rite behind the display so i hung the overflow box over both the display and
sump so no need for piping.....just on the return
i'm not sure if the 200
GPH pump will work with the 600
GPH overflow so i'm going to have to test it
here are some pic i took before siliconing
^^^u can see in this pic on the left of the bubble trap is the return and on the right of it is the small 4"
fuge 
As u can see in some pic the return of the
skimmer sits inside the overflow box I hope that will work
**the tank and
sump will be back to back**
as u can see the overflow box is "inside" the
sump
the box will remain the way it is with no bulkhead or nothing
my question is will the box work properly if the water level in the
sump is higher than the hole b/c the water level will be where the first baffle is
