Alright, made some progress today. The stand and canopy are almost finished. The builder just needs to add some trim, sand and throw some clear coat on them. Should have them tomorrow.
Here's a couple of rough pics.
Back of Stand/Canopy - 2 outer holes will have fans on a temp. controller, 2 inner holes will have fans on when light is on. 2 notches on the canopy are where the return lines will come through.
Looking from the right front - Stand and canopy will have doors on all 3 sides for easy access to whatever we need to access.
Shot from the left front
I'll start adding baffles to the
sump tomorrow, should have the finished up this weekend.
